| Author |
Message |
    
DENNIS DAUGHERTY (Tigerdriver)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
I have a Allis Chalmers Terra Tiger I would like to get up and runnig. Any advice as to how or where to start this project. Any and all help would be appreciated. |
steve
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
I HAVE THE SAME PROBLEM I STARTED BY PULLING OUT THE ENGINE GETTING IT RUNNING WAS A BIG WIN' IT IS A SACHS 2 STROKE OUT OF A SNOWMOBILE. I ALSO TRIED TO FIND OUT WHAT ALL WAS MISSING. SO FAR I FOUND THAT THE CLUTCH PULLY WAS GONE FROM THE JACK SHAFT,THE DISC BRAKE IS ALSO GONE,I ALSO FOUND THE STEERING CLUTCHES ARE HOME MADE" I JUST PUT IT UP ON BLOCKS AND STARTED TAKING SHIT APART I FOUND THE LEFT REAR HUB HAD A SHEARED PIN AND WAS NOT WORKING. WHEN I TRIED TO REMOVE THE TIRES THE STUDS ON TWO OF THEM SPUN AND WOUL NOT COME OFF,AND THERES NO WAY TO HOLD THEM FROM BEHIND,IM GOING TO CUT THE DRY ROTTED TIRE OFF AND GET IN THRU THE RIM I GUESS,WELL ENOUGH OF THAT SHIT : ALSO I TOOK OUT THE CAB LINER AND PUT FIBERGLASS WEBBING AND RESIN ON THE TROUBLED LOOKING AREAS.IF YOURS IS LIKE MINE YOU WILL FIND "FARMER GENIUS" EVERY WHERE.PATCHED,WELDED,AND PUT AWAY WET!!!!!!!!!!!!!!!! |
steve
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:45 pm: | |
hows that going dennis? write me maybe i can help,steve |
(Unregistered Guest)
Unregistered guest
Posted From: 198.62.69.76
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, April 24, 2006 - 12:36 pm: | |
Pull the engine. Check points, install new plug gap 0.018 is a must. You have to have the engine out to make the point check. |
|
Restoration of older ATV's