| Author |
Message |
    
max
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
The 277cc Sachs engine (16 hp) has plenty of power in my Terra Tiger. A transmission with reverse gear wouldn't hurt, though. |
John Kevin Maiolo (Johnmaiolo)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
I have a JLO 292cc rockwell in my terra tiger. Should be about 18 HP. It produces plenty of speed, however I'm not sure about power yet. Not many hills around here. A 4 cycle would be quieter and have plenty of torque. |
Eric Schultz
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
I have a Terra Tiger that I was going to restore with a different drive system and was planning to use a forward reverse unit from an old Johnson snowmobile.
You may see my machine and the drive parts I have aquired so far up for sale in the near future at this website. ES |
Kyle Framer
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
I have a terra tiger and I need to rebuild the clutches but I can't get the shaft they are on out of the ATV. Does any one know how to get the shaft out. |
JOHN GOCKE
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
I also have aquired a Terra Tiger. I don't know what type engine it has, I would love to see some pictures of another one's engine so I can start looking for parts for mine. Perhaps I could e-mail some digital pictures of my engine to someone out there that has a Terra Tiger and we could find out if they are the same.
It has a Tillitson carb, lots of Bosch electrical parts and no markings on the engine.
There is a Harley Davidson sticker on the air cleaner and a Harley emblem under the headlight. I think someone might have just stuck them on, who knows, I'm probably the fifth or sixth owner of this project.
Please contact me if you think you can help, in anyway. I would love to get it running again but there is too much guess work.
Thanx!! john E-MAIL ADDRESS: JOHNGOCKE@HOTMAIL.COM |
william bachtell
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
gear specs
have a tera tiger looking for specs on the secondary gear?
mine looks like # 40 by about 68 tooth.
want to get a bigger gear meed to know the bolt pattern. |
Dan Crose
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
I have a Terra Tiger and the Rt front axel is bent I had a minor accident , is their an easy way to remove the axel or to just straighten it without taking it off. I would appreciate any input.
Thanks, Dan E-MAIL ADDRESS: communitymridl@hotmail.com |
IHAVENONAME123
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
HI I LIVE IN CALIFORNIA AND WOULD LIE TO FIND PEOPLE WHO HAVE 6X6 VEHICLES OF ANY IND FOR SALE OR TRADE PREFFER GOOD CONDITION BUT DUE TO COST WILL SETTLE FOR A FIXER UPPER PREFERABL AN OLDER MODEL HOW DO I LOCATE PEOPLE INMY AREA? |
Ryan Christensen
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
I recently bought a terra tiger and it is in very good condition. I am sure the motor has been switched out because is has a briggs and stratton 11 hp motor in it, I cleaned the carbuerator but that's about all I had to do to it. I am considering fixing it up to be in original condition, but might sell it so someone more "gun hoe" about restoring one.
I have pictures I can e-mail.
Contact me @ rchrist82@msn.com |
Lee A Ulsh
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:43 pm: | |
I would like to know if Mark Murrany would Email about how he put reverse in the Terra Tiger using a GM turbomatic automotive tranmission (gears) |
Mark Muranyi (Unregistered Guest)
Unregistered guest
Posted From: 69.161.89.146
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, July 08, 2005 - 02:50 pm: | |
Hello. I don't frequent this site often but I am always interested in seeing what others are doing with there Tigers. For those who are looking for ways to have a reverse gear in theirs I cannot offer any easy solutions. I wish I could.
I spent hours studying different approaches to the possibility before settling on the one I built.
First, I have a complete machine shop at my disposal (mine) and designed the fabricated parts using a cad system. Not that it's necessary but I just have it as a nice tool.
Second, the GM gears I used are a set of planetary's out of a turbomatic 350 which had to be modified extensively. Again no easy way. I just didn't want to make those from scratch which would have made it way too much work.
I am however always on the look out for forward and reversing style trannys that could be adapted with much less effort for the usual enthusiast.
It's a shame that Allis Chalmers didn't take the time and effort to put that necessary feature into what is I think a robust machine.
I will be at Copper Ridge again this year for any of you attending. I always like to see other Tigers. There's never enough vintage machines.
Regards. Mark Muranyi (spelled correctly). |
robert bailey (Unregistered Guest)
Unregistered guest
Posted From: 24.206.242.172
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 06, 2005 - 12:43 pm: | |
I have a terra tiger with a kawasaki (KT150) 292cc arctic cat engine in it and I need a carburetor for it I believe it is a carter hr70b but not realy sure. NEED HELP |
Restoration of older ATV's