Posted on Wednesday, February 23, 2005 - 10:42 pm:
looking at buying a max 2 what should i look for? cant seem to see any of the vital parts chains sprokets bearings without taking the body off how do i tell what kind of shape they are in? is this a good machine or is this a old relic that is going to give me nothing but problems
Posted on Wednesday, February 23, 2005 - 10:42 pm:
to jackson from scrambler71 all you have to do lift the seat out of the max then you can see the sprocket and chain ect inside it sound like a good old max it should have the original 16 oh 160 tecumseh engine please send me a picture of it then i can help you more please email me at daveyoder@hotmail.com and that could also have the original balloon tires on it also do a compelte inspection of it and look for wear or tear and if anythings lose and make sure the t20 trans sift good tight inside and out i hope this help jackson from daveyoder scrambler71
Posted on Wednesday, February 23, 2005 - 10:42 pm:
Check the bearings by wiggling the wheels and tires, if you can feel movement, the bearings need relaced. Also if you can jack up on side of the machine or even get one tire off the ground rotate it and see how loose the chain is. Grab the idler sprockets and check for play.
Restoration of older ATV's 
