| Author |
Message |
    
Joey
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:33 pm: | 
|
My max II has started tracking to the right. I put a 1x4 against the tires. The second and third tire are even, but the whole front tire is about an inch or so in. The left side tires are all even against the board. I checked the tire pressure and I opened it up. I can't see anything right off hand. Any Ideas? |
david berger (Davidrrrd)
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, February 23, 2005 - 10:33 pm: |
|
HOW OLD IS IT?
MINE DOSE THAT ALL THE TIME,
MY MAX HAS INNER BUSHINGS AND THE ONE OUTER BEARING,
IT USES THE CAM LOCK TO HOLD THE AXLE IN POSITION,
BUT A BUMP AGENSED A TREE MAYBE PUSHES IT IN OR SOMETIMES THERS SOME SORT OF FORCE THE PULLS IT OUT SOME,
ON MY LEFT SIDE I FINALY HAD TO PUT 3/4 INCH ID WASHERS ON PIN THAT BUSHING END RIDES ON TO BUILD OUT FROM FRAIM TO THE CORRECT HIGHT FROM FRAIM TO PREVENT THE AXLE FROM MOVEING TWARDS THE FRAIM AND CAUSING CHAIN/SPROKET MISALIGNMENT PROBLEMS,
AM STILL HAVEING THAT PROBLEM ON RIGHT SIDE BUT HAVENT GOTEN OFF MY BUT TO DO THE SAME THERE |
|
Shop Talk: Tech Tips and Q&A section