| Author |
Message |
    
Doug Geange
Junior Member
Username: Dodge03
Post Number: 17
Registered: 05-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, January 11, 2011 - 07:05 pm: | 
|
Just wondering what most guys run when running supertracks on an 8x8. I have a conquest and have been having trouble with the tires spinning on the rims and ripping the valve stems from the tubes. I am going to try and go tubeless on the fronts and rears on both sides to see if things improve. Any comments/suggestions appreciated. |
Jeff bar
Advanced Member
Username: Argo8x8
Post Number: 211
Registered: 03-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, January 12, 2011 - 01:52 pm: |
|
Tube are not to be used, I run 21" Rawhide tires on the new 8x8 bead lock rims, I got them from Richard Clark, tire problems went away
Jeff Bar |
Timothy Schotanus
Member
Username: Mudbuster
Post Number: 35
Registered: 01-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, January 15, 2011 - 06:26 pm: |
|
You could always do the old screw through the rim thing. That is where you put a short screw through the bead section of the rim. The screw should be just long enough to prick the tire without going all the way through the tire. |
L.A. Philip Osborn
Advanced Member
Username: Roadwolf
Post Number: 234
Registered: 02-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, January 16, 2011 - 01:15 pm: |
|
I have used screws with good luck too!
Phillip Osborn LA |
david berger
Senior Member
Username: Davidrrrd
Post Number: 552
Registered: 01-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, January 27, 2013 - 09:33 am: |
|
there are two pictures of this simple and cheep mod on the "how too" page here on rout6x6 about 3/4 of the way down the page.
(it works very good and allows use of tubes, evan at really low tire psi) |
Shop Talk: Tech Tips and Q&A section