| Author |
Message |
    
rollz
New member
Username: Rollzdogg
Post Number: 1
Registered: 05-2010
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, May 26, 2010 - 07:38 am: | 
|
My argo makes a really loud chunky noise when i turn the argo ? when i am going straight it seems to be ok but when i pull back on either brake or turn left or right , i get a really bad chunky , 1 big clunk noise here and there ? anyone know this problem? i seems to be coming from the chains from the tranny to main drive axle! |
Jeff bar
Advanced Member
Username: Argo8x8
Post Number: 200
Registered: 03-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, May 26, 2010 - 12:01 pm: |
|
Perhaps you have a bad bearing or too loose of chain??
Jeff Bar |
Erich Kelter
Advanced Member
Username: Fisherman
Post Number: 151
Registered: 11-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, May 27, 2010 - 07:30 am: |
|
Make sure the chain tensioners are properly adjusted, or like Jeff said, your chains too loose, beyond adjusting. You may also need new adjuster blocks(plastic blocks that the chain rides on. |
Dave Keeso
Advanced Member
Username: Argomag
Post Number: 121
Registered: 01-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, May 28, 2010 - 10:01 pm: |
|
Check your chains, if they are too loose they will jump the sprocket. ALso make sure the tensioner springs are all where they are supposed to be. sometimes when they are too loose or springs stretched they pop off and get caught up in the chains = popping or clunking sounds like chain jumping the sprocket to me |
Skip Saul
Member
Username: Giantdog
Post Number: 30
Registered: 10-2006
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, May 29, 2010 - 12:34 am: |
|
I have an argo conquest if i lock up the brakes at full throtle then it will pop and make noise but if i back out of the throtle a little and apply the brake smooth it dose not pop and works good like it shuld that works for me Skip |
Shop Talk: Tech Tips and Q&A section