| Author |
Message |
    
Kenneth Schroeder
New member
Username: Ken_glen2
Post Number: 6
Registered: 11-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Tuesday, November 25, 2008 - 01:51 pm: | 
|
I would like to know if a 18hp briggs will fit in to a 16hp 76 to 80s argo body.thank you ken. |
Jeff bar
Intermediate Member
Username: Argo8x8
Post Number: 71
Registered: 03-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, November 27, 2008 - 09:10 am: |
|
I did a conversion from a old two cycle machine, installed a vanguard, you will have to do a bit or work on front of body, but you must get the correct engine, i bought the wrong one first and ended up selling it and buying a correct one. Be careful what you buy, ebay is not a good source, people there will tell you anything and sell you something odd Good luck
Jeff Bar |
Kenneth Schroeder
New member
Username: Ken_glen2
Post Number: 8
Registered: 11-2007
Rating: N/A
Votes: 0 (Vote!) | | Posted on Friday, November 28, 2008 - 08:52 am: |
|
Thank you Jeff. The motor I am looking at is 18hp Briggs and it sells for $1299.00 Can., serial# 356447-0075-E1. I'm not sure what year but I have a pic that I sent too Dave Keeso in another post under same topic if you want to take a look at it. Everything is re-built, also I have a drive clutch brake if someone is interested. (it stops the gear grinding)Thanks again.
Ken Schroeder |
|
Shop Talk: Tech Tips and Q&A section