| Author |
Message |
    
denis de melo
New member
Username: Brno
Post Number: 1
Registered: 01-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, January 06, 2008 - 12:39 pm: | 
|
Hi everyone i just purchase an argo 8-I/C and it has i problem. when i put in gear forward or reverse there is one wheel that turn sitting in the argo the second wheel to the right turns only
i check to see if there are broken pin but not one was broken.now i think it's the tranny not sure can someone point me on the right track
thanks |
Erich Kelter
Intermediate Member
Username: Fisherman
Post Number: 70
Registered: 11-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, January 06, 2008 - 07:40 pm: |
|
I sent you an e-mail. |
Erich Kelter
Intermediate Member
Username: Fisherman
Post Number: 71
Registered: 11-2005
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, January 07, 2008 - 12:44 pm: |
|
So when you put the transmission in forward or reverse, only the second wheel on the driver side moves. Do both of the driveshafts turn forward or backward when in gear (where the brakes are)? Maybe there are more pins broken than you can see. |
denis de melo
New member
Username: Brno
Post Number: 2
Registered: 01-2008
Rating: N/A
Votes: 0 (Vote!) | | Posted on Monday, January 07, 2008 - 10:34 pm: |
|
i notice that the driveshaft to the right side turns but the left side doesn't,are there pins inside the tranny? ok what about this if the driveshaft turns on the right why does one wheel turns and not all.Am i missing something.i order a manuel and i will see if there are more pins that i miss.have any ideals? Thanks for your help |
Shop Talk: Tech Tips and Q&A section