| Author |
Message |
    
Ernie Shynkaruk
New member
Username: Pineburn
Post Number: 9
Registered: 10-2006
Posted From: 207.195.43.100
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 25, 2007 - 08:03 pm: | 
|
HI I was wondering if there is another carb I could put on my argo. It has a16hp tecumshen, with a walbro LMH-22A carb. It very hard to Start and once it starts it will not idle. Take it for a little run and it will idle fine. It also has a bog when you hit the throttle. I was thinking of changing the carb to see if that would help. Any suggestions. Also looking to replace the fuel pump. Any suggestion would help |
pgjeepster
Junior Member
Username: Pgjeepster
Post Number: 18
Registered: 05-2007
Posted From: 206.172.5.252
Rating: N/A
Votes: 0 (Vote!) | | Posted on Saturday, August 25, 2007 - 09:50 pm: |
|
A carb kit would be in order if you have not done this yet, check all you connections to the intake you have to take off the shielding to see the intake manifold, check your gaskets an air leak will cause this type of problem. Any after market pulse pump will work on your machine. |
Richard Clark
Senior Member
Username: Route6x6
Post Number: 182
Registered: 02-1997
Posted From: 74.129.201.133
Rating: N/A
Votes: 0 (Vote!) | | Posted on Sunday, August 26, 2007 - 10:58 am: |
|
Ernie
Check the condition of valves, as in do a compression check, OH-160's were great engines when new, however today, 20-25 years later many are in poor condition, the engine was so solid that they will run when very worn. do not over look valve adjustments, engine should have around 140psi to run correctly. This may not be the problem, but you should check it too.
Richard Clark
ROUTE6x6
See my ATV parts website (listed below) for more ATV parts.
I have the world's largest supply of new, used and reproduction
AATV parts. We have most parts for most machines. Please call
on phone for details.
Terms:
We accept Visa. Mastercard and Discover Credit Cards, along with Money Orders
For your protection we only accept credit cards by telephone authorization.
--
Thanks,
Richard Clark
_________________________________________________
ROUTE6x6
4846 Quarry Rd
New Albany IN 47150
812-944-1643 8am- 6pm Eastern Time Monday-Friday only
Please NOTE EXTENDED HOURS
PLEASE NOTE: THE ABOVE ADDRESS IS FOR MAIL and SHIPPING USE ONLY,
I keep no machines or parts at the above address. Also there
are no business hours at the above address.
Visit my ATV parts website at:
http://6x6parts.com
Visit my ROUTE6x6 website at: http://www.route6x6.com/ |
|
Shop Talk: Tech Tips and Q&A section