Route 6x6 Discussion Board: Tecumseh hh160 16hp with no spark in scrambler

Route 6x6 Discussion Board Shop Talk: Tech Tips and Q&A section Tecumseh hh160 16hp with no spark in scrambler

< Previous Next >

Author

Message

Jeff Hathaway
New member
Username: Letitride68

Post Number: 1
Registered: 08-2005
Posted From: 205.188.117.73

Rating: N/A
Votes: 0 (Vote!)

Posted on Sunday, August 28, 2005 - 11:31 am:

Hello I have checked the wiring replaced the solid state ignition andf checked the switch and still no spark .can anyone help?

mike abbey
Junior Member
Username: Mike_abbey

Post Number: 16
Registered: 07-2005
Posted From: 67.174.128.16

Rating: N/A
Votes: 0 (Vote!)

Posted on Monday, August 29, 2005 - 06:30 pm:

is this a oh 160 you should check the air gap between the longest pin on the flywheel you might have it to far away to sense it to trigger.i am not shur but i think it suposed to be .005.make doubl shure its the long pin on the flywheel or you will bust off the long pin spinning the engine.just a thought my tecumsa the magnets came unglued and i have seen a couple others do this to all the magnets stuck to the stater and it wont spark or charge