| Author |
Message |
    
Anonymous
Posted From: 64.124.120.31
Rating: N/A
Votes: 0 (Vote!) | | Posted on Wednesday, April 13, 2005 - 06:45 pm: | 
|
after hard day of riding and getting lost, and putting at least 15 miles on my max, about 7 on the road, I heard a noise and stopped to see what it was. I found a bolt 8"=10" long laying in the bottom of the max. I coulnd't see where it came from? any ideas? and how bad a problem is this? Also it is a bit bent, in the middle. Thanks |
david berger
Member
Username: Davidrrrd
Post Number: 41
Registered: 01-2005
Posted From: 172.158.104.51
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, April 14, 2005 - 09:40 am: |
|
it may have come from your driven cluch (secondary pully on trans)
put it back in or replace with new one, maybe some blue lock tight if problem persists |
Jerry R. Nuss
Member
Username: Jerrynuss
Post Number: 20
Registered: 02-2005
Posted From: 66.20.227.1
Rating: N/A
Votes: 0 (Vote!) | | Posted on Thursday, April 14, 2005 - 09:20 am: |
|
I'm not familiar with the max set up but that is a long bolt so I'd check the engine mounting bolts or the frame and transmission mounting. If you bought the machine used it may just be something left in there. Obviously you aredoing the right thing and checking. |
Shop Talk: Tech Tips and Q&A section