By bandit on Unrecorded Date: Edit

does anybody know where i can get a body for an old attex not sure what year or model i know it is from the 70s.any help would be great

By david berger (Davidrrrd) on Unrecorded Date: Edit

whats wrong with yours?

By kush on Unrecorded Date: Edit

I'd think you could patch just about anything out there until somebody starts making the bodies again. Check with Richard if he has any left. Didn't somebody look into retrofititng the MAx or Argo body?

By bandit on Unrecorded Date: Edit

my body has a big chunk out of the front where the light goes

By david berger (Davidrrrd) on Unrecorded Date: Edit

BANDIT IS YOUR ATTEX A PRE 1973 MODEL?
DOSE AN ASATONE SOAKED RAG SOFTEN THE PLASTIC?
(TEST WITH A RAG SOMEPLACE INCONSPICUES LIKE INSIDE THE ENGIN COMPARTMENT)
IF YOU HOLD THE ASATONE RAG ON A SPOT FOR A FEW MINUETS AND IT SOFTENS AND OR DISOLVES SOME ONTO THE RAG IT IS a.b.s PLASTIC AND MY a.b.s. REPAIR KITS ARE WHAT YOU NEED, YOU JUST PREPAIR THE EDGE AND APLY OVER DUCT TAPE THAT HAS BEEN STUCK ON FROM THE INSIDE AND SHAPED LIKE THE PART YOU PLAN TO BUILD,
JUST PAINT ON THE REPAIR PLASTIC IN THIN COATS AND LET DRY, THEN PREPAIR AND RECOAT TILL IT IS THE THICKNES YOU NEED, PRESTO INSTANT ATTEX!!
THERE ARE A NUMBER OF PEOPLE ALREADY HERE ON RT6X6 WHO HAVE REPAIRED THERE ABS BODYED ATTEX,SHAPERAL, AND AMPHICAT BODYS, ALSO THE FLOORBOARDS ON MANY MODLES WAS BLACK ABS AND I HAVE PLENTY OF THAT COLOR NOW TOO SO
WORRY NOT YOUR ATTEX IS ONLY A FEW STEPS FROM REPAIRED, ALSO YOU WILL FIND A FEALING OF FREEDOM TO DRIVE IT LIKE YOU STOLE IT AFTER YOU FIND OUT HOW EASY IT IS TO FIX ANY DAMAGE YOU MIGHT DO WHILE ENJOYING A YOUR RIDE'S,
(MORE INFO A LITTLE FERTHER ALONG IN -
ROUTE6X6 DISCUSSION BOARD:SHOP TALK:TECH TIPS AND Q&A SECTION: ATTEX BODIES)
ARCHIVED THREW AUG 5 ,1999
~ENJOY~