By scott jones on Unrecorded Date: Edit

I recently purchased a terra tiger to restore and one of the parts that are missing is the main drive shaft which i believe contains the clutches or brakes for steering. Can anybody help me in getting one or show me how to construct one?

By Bob Eells on Unrecorded Date: Edit

Scott,
I used to own a Terra Tiger many years ago. If memory serves me I do believe you are correct. Try e-mailing Richard Clark. He owns this discussion board. and has a very broad knowledge base on quite a few machines including yours. I also think he probably has what you need as I have seen these parts listed in parts section. Good luck. P.S Ihad very good luck with my terra tiger as it was built like a tank. This machine is very low tech and can be maintained with regular tools.

By Mike on Unrecorded Date: Edit

Can someone suggest what type of pins to use as replacements for the pins that hold the sprockets onto the axle shafts? Part number and where to buy would be great!

Thanks,
Mike

By roadwolf on Unrecorded Date: Edit

mike, RC had some w/arced washers on this site under parts.

By Mike on Unrecorded Date: Edit

Wanted: Terra Tiger Parts / Information.

I'm looking for a mounting plate for a JLO 295 engine in a Terra Tiger. Also looking for exhaust flange for JLO 295 and a muffler for Terra Tiger. Please e-mail me if you have any of these parts.

If I can't find a mounting plate for a JLO 295, I need the dimensions of the mounting holes for the engine in relation to the mouning holes for the plate to the Tiger. I can redrill my 292 plate for the 295, but I want to make sure I get the clutch lined up with the secondary clutch.

Thanks for any help,

Mike
mrdowns@comcast.net