Subtopic	Posts		Updated
	Archive through March 12, 2001	1

By bbbinan@yahoo.com on Unrecorded Date: Edit

Hi Gordy, I have just picked up a 1970 Bazoo from the OTACO comp.If you have any information on this machine, I would like to know about it as I am going to start restoring this machine in the spring. Or if anyone else on the sight has any information I could sure use it.

By junkyarddawg80 on Unrecorded Date: Edit

I have one too and can't find anthing out about it either

By bhampson on Unrecorded Date: Edit

I also have a bazooo a 1970 have parts book would love repair manual not that it is very complicated
but it would be nice . been told to throw the CCW in the lake what kind of engine have you used

By roadwolf on Unrecorded Date: Edit

hey, bhampson i juss picked a bazoo as well. it is complete save for the motor. i found out on the route 6x6 it orginally came with a 225 CCW 12.5 horse. have one from a old amphicat. but before you toss yours into the lake can i have the exhaust manifold?, as i desparetly need one!

By Kevin Percy on Unrecorded Date: Edit

You guys may already know this, but that CCW was used as a snowmobile motor too. If you have any old sled wreckers near you you should be able to get things like that manifold from them if need be.
Good Luck with the Bazoos

By Belton Zeigler on Unrecorded Date: Edit

I am looking to buy a 1986 Max II with a Techumsah 16. The old darling seems to be in good mechanical shape (except for a bum carborator and bad throttle cable) but is cosemtically rough. What should I look for? What range of price seems right?
Any advice?

By HELLON6WHEELS on Unrecorded Date: Edit

get it as cheap as you can,the tecumseh motors were not all that great.the parts are getting fairly hard to come by for them.i would buy it with the intentions of putting an updated motor in
it.make sure it is in fact a 1986,write down the serial #'s and call the factory and they can tell you the year of the machine.is the body poly or abs if it is abs plastic then it is early
70's and someone put the tecumseh in it.any cracks/breaks in the plastic?

By david berger (Davidrrrd) on Unrecorded Date: Edit

YAH, MINES AN 86 AND SOMONE CHAINGED IT TO A 440CC 2-STROKE TWIN! BLESS HIS HEART!

By wolfgang hofmann on Unrecorded Date: Edit

need new or good exhaust for Bazooo, i am in germany. regards wolfgang hofmann

By roadwolf on Unrecorded Date: Edit

roadwolf, wolfgang, are you sure we aren't related?
i belive the OEM muffler was a small car oval exhaust muffler with several feet of flex pipe.