Moving the battery

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: Moving the battery
Top of pagePrevious messageNext messageBottom of pageLink to this message   By Dave on Unrecorded Date: Edit

I just bought a 1991 Argo 6x6. The battery is mounted in a box in the left rear. The problem is it takes up way too much room, causes access problems to the rear chain and I cannot get the floor pan out without removing the battery and box. The I/C parts manual shows the battery should be mounted in the right front. I cannot see any mounting hardware in the front. Does anyone know if there is a battery mounting kit for mounting the battery where the picture says it belongs? Any suggestions would be appreciated.

Top of pagePrevious messageNext messageBottom of pageLink to this message   By David Keeso (Argomag) on Unrecorded Date: Edit

Send me a pic of the ARGO and I may be able to help further. I have to see which machine model it is so I can check the old manual.

djhkeeso@rogers.com


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation