How many track pieces on a older argo

Route 6x6 Discussion Board: Shop Talk: Tech Tips and Q&A section: How many track pieces on a older argo
Top of pagePrevious messageNext messageBottom of pageLink to this message   By alf on Unrecorded Date: Edit

I have a 1983 6 wheel argo. how many pieces of
track do I use on each side? The dealer is telling me I use 28 1/4 pieces, but they over lap. I tried 27 1/4 and looks to tight. 28 pieces there is about 1 inch of gap before i let any air out of the tire. Can any one help?
Thanks
Alan

Top of pagePrevious messageNext messageBottom of pageLink to this message   By Billy McGraw (B_and_t_bigfoot) on Unrecorded Date: Edit

For the 2003 Bigfoot 6x6 I was told that the actual number of pieces is approximate, themain thing was to have 2" - 2 1/2" between the last peices of the track on each side. This is with the front and back tire being deflated and the middle having 3psi. It will be tight you may need to use large c clamps to put them together.
This is for the 2003 bigfoot it may be a little different for an 83.
Hope it helps.


Add a Message


This is a public posting area. If you do not have an account, enter your full name into the "Username" box and leave the "Password" box empty. Your e-mail address is optional.
Username:  
Password:
E-mail:

Administrator's Control Panel -- Board Moderators Only
Administer Page | Delete Conversation | Close Conversation | Move Conversation